Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw K1200lt
Part: Engine oil

In this tutorial, you will see how to change the engine oil in a BMW K1200LT, a very simple and quick operation. First, ensure the engine is cool enough to operate safely, then place a container underneath, locate the drain hole bolt, and unscrew it using an Allen key. Allow all the oil in the system to drain out, open the filter cap, and unscrew the filter. At this point, simply tighten the replacement, reassemble everything, and add the required amount of oil through the designated hole.

Posted on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

K1200lt In this guide, you will find instructions on how to remove and replace the oxygen sensor or lambda probe of the BMW K1200LT motorcycle in simple step…
K1200lt In this tutorial, we will see how to replace the engine oil in the BMW K1200 LT, a very simple and quick operation. First, let's make sure that the e…
K1200lt Below we will see the main instructions that will allow us to disassemble and replace the battery of the BMW K1200 LT motorcycle. First, we put the m…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos