Do it yourself
| ||||
|
Model: Bmw K1200lt
Let's see in this guide the instructions on how to disassemble and replace the oxygen sensor or the lambda sensor of the BMW K1200LT motorcycle, in simple steps. First of all we put our motorbike on the central stand and we begin to disconnect the electrical connector that we find on the probe; after which we insert a star wrench inside the probe wiring to unscrew our sensor, as shown in the video. At this point we are going to install the new oxygen sensor, fixing it correctly; we carry out the electrical connection and the further wiring, reassembling everything!
Posted on 14 August 2022 by ScegliAuto
|
How to change the gearbox oil of the Piaggio Vespa Px 125 - Lml Star 125Today we will see, in this short and simple guide, how to replace the transmission oil of the Piaggio Vespa Px 125, but also of the Lml Star 125 2-stroke. First of all we put the central stand and we start to unscrew the oil vent bolt of the transmission, which we find on the right side casing; to do this we use a 10 mm socket wrench, letting the oil drain in a container for about ten minutes. At this point we unscrew the filler screw, in order to let the oil flow more quickly; then we finally top up, following the video to the end! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |