Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Key Battery Replacement on BMW GS R1250

Model: Bmw R1250 Gs
Part: Key

Video tutorial

Replacing the key fob battery on a BMW GS is really very simple. To do this, press the button to release the key, then remove the cover of the fob by pulling it off by hand (if you find it difficult, use a small flat screwdriver to assist).

The battery in question is a CR2032, which you can easily find in any hardware store or large supermarket. Extract it (again, if necessary, use the aforementioned screwdriver) and insert the new one you purchased.

Close the fob by refitting the cover and voilà! Done!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the BMW R1250 GS
How to Replace the Remote Battery on the BMW R1250 GS
R1250 Gs As shown in this tutorial, replacing the remote battery on the BMW R1250 GS is a very simple and quick operation. For this, you will need a replaceme…
How to Replace the Remote Battery on the BMW R1250 GS?
How to Replace the Remote Battery on the BMW R1250 GS?
R1250 Gs As shown in this tutorial, replacing the remote battery on the BMW R1250 GS is an extremely simple and cost-effective operation. You will only need a…
How to Replace the Key Fob Battery on the BMW R1250 GS?
How to Replace the Key Fob Battery on the BMW R1250 GS?
R1250 Gs In this tutorial, learn how to replace the battery in the key fob of the BMW R1250 GS, a very simple and quick operation. You will need a replacement…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos