Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on the BMW R1250 GS?

Model: Bmw R1250 Gs
Part: Key

Video tutorial

As shown in this tutorial, replacing the remote battery on the BMW R1250 GS is an extremely simple and cost-effective operation. You will only need a replacement CR2032 battery.

First, press the top button and extend the emergency metal key, then lever the cover off using the edge just freed by the key. Once done, extract the old battery, insert the new one in the correct orientation, and reassemble everything by following the reverse procedure.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the BMW R1250 GS
How to Replace the Remote Battery on the BMW R1250 GS
R1250 Gs As shown in this tutorial, replacing the remote battery on the BMW R1250 GS is a very simple and quick operation. For this, you will need a replaceme…
How to replace the battery of the BMW R1250 GS remote control?
How to replace the battery of the BMW R1250 GS remote control?
R1250 Gs In this tutorial, we can see how to replace the battery of the BMW R1250 GS remote control, an extremely simple and quick operation. To do this, we w…
How to Replace the Remote Battery of a BMW R1250 GS?
How to Replace the Remote Battery of a BMW R1250 GS?
R1250 Gs In this tutorial, you will learn how to replace the remote battery of a BMW R1250 GS, a very simple and quick operation. For this, you will need a re…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos