Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Bmw
    3. : C 600

Model: Bmw C 600
Part: Brake pads

In this video tutorial, you will learn how to remove and replace the rear brake pads on a BMW C 600 Sport scooter. To make access easier, remove the rear wheel; then use an Allen key to remove the bolts securing the brake caliper. At this point, extract the old pads and replace them with the correct new ones; to do this, retract the caliper piston (or remove the caliper to make the operation easier) by levering it. Insert the pads in the correct orientation and reassemble everything, following the video to the end!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Change for BMW C 600
Oil Change for BMW C 600
C 600 Warm up the engine of your BMW by leaving it running for a few minutes. This will make the engine oil more fluid and allow it to drain more easily fr…

How to Replace the Headlamp of the Triumph Street Triple 765R?

To replace the headlamp of the Triumph Street Triple 765R, you need to loosen all the screws that secure the headlight unit to its housing: these screws are located on the inner part of the dashboard and on the two side sections of the corresponding headlamp. Once the screws have been loosened, you can pull the headlamp out from its housing and disconnect the connectors attached inside; this way, the old headlight unit can be completely removed and replaced with the new one. The new unit must then be secured and connected properly.

Watch the video!


by ScegliAuto

More videos