|
Do it yourself
| |||
| ||||
Maintenance of Gearbox and Final Drive on BMW GS 1100
Model: Bmw Gs 1100
Video tutorial
Unscrew the plug screw and drain the gearbox oil. The magnetic plug shows the condition of the gearbox in terms of dirt and wear. Clean the inside of the gearbox with the appropriate cleaning additive and re-screw the plug. It is recommended to use 75W-90 for the gearbox. Once filled, close the upper fill hole by screwing in the respective screw. Perform the same operation on the final drive by also unscrewing the drain screw, as shown in the video, cleaning with the additive, and re-screwing the plug. Then fill through the upper hole using 75W-90 and finally close the fill hole of the final drive. Good luck!
Updated on 16 April 2026 by ScegliAuto
Related tutorials
Gs 1100
Start by positioning your BMW GS1200 on the centre stand. Next, run the engine for a few minutes to make the oil more fluid. Once done, unscrew and r…
|
How to Replace the Final Drive Oil of the Moto Guzzi Nevada 750
Today, we will go through the main steps for replacing the final drive oil of the Moto Guzzi Nevada 750. First, place the motorcycle on the centre stand and start unscrewing the final drive oil plug located under the transmission, allowing it to drain into a container for about ten minutes; then unscrew the filler cap to let the oil flow out more quickly. At this point, top up with the new transmission oil of the correct type (as indicated in the owner's manual), pouring the right amount of oil and finally securing the filler cap! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |