Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a BMW R1200GS?

Model: Bmw R 1200 Gs
Part: Battery

Video tutorial

To replace the battery on the BMW R1200GS, first remove the plastic cover of the frame, which is held in place by three elastics. Once this is done, you can access the flap that protects the battery compartment.

After unscrewing the only screw present, gently pull to remove it from the clips. Also, remove the second cover, which is also clipped in, and extract the battery.

Disconnect the negative terminal first, followed by the positive terminal. Now that you have removed the old battery, simply follow the reverse procedure to install the new one.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Removing the Engine Air Filter on a BMW R1200GS
Removing the Engine Air Filter on a BMW R1200GS
R 1200 Gs Remove the original engine air filter on a BMW R1200GS. Follow this guide video for the replacement procedure. Position the motorcycle on a centre st…
How to Replace the Battery on a BMW R 1200 GS
How to Replace the Battery on a BMW R 1200 GS
R 1200 Gs To replace the battery on the BMW R 1200 GS, remove the side cover of the bike located just beneath the seat on the right side. Once this cover is de…
How to Replace the Remote Battery on the BMW R 1200 GS?
How to Replace the Remote Battery on the BMW R 1200 GS?
R 1200 Gs In this tutorial, we will see how to replace the battery in the remote for the BMW R 1200 GS, an extremely simple and quick operation. To do this, yo…

How to replace the air filter in a Suzuki Burgman scooter?

As we can see in this tutorial, replacing the air filter in the Suzuki Burgman 650 scooter is an extremely simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by opening the small glove compartment located under the handlebars, then remove the panel on the opposite side. Next, unscrew the 4 screws indicated with a simple cross-head screwdriver, remove the relay box, and extract the filter from the housing using pliers. Once the replacement is inserted, you can follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos