|
Do it yourself
| |||
| ||||
Model: Bmw F800gs
Today, we will look at the instructions for draining and replacing the coolant on a BMW F800 GS motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the bleed screw located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the filler cap and top up with the new antifreeze, suitable for your radiator; fill it to the maximum level mark, then start the engine and top up the fluid if necessary!
Updated on 4 June 2026 by ScegliAuto
Video tutorial
Related tutorials
F800gs
In this short video, you will see how to bleed and replace the coolant or antifreeze on a BMW F800 GS motorcycle. To bleed the cooling system, remove…
F800gs
This guide explains how to remove and replace the engine air filter on a BMW F800 GS in simple and quick steps. First, place the motorcycle on its ce…
F800gs
In today's video, we will see the main steps to replace the coolant or antifreeze of the BMW F800 GS motorcycle. First, place the bike on its centre …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |