Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Bmw
    3. :
  3. F800gs
    4. : How to replace the coolant on BMW F800 GS

Model: Bmw F800gs
Part: Antifreeze liquid
How to replace the coolant on BMW F800 GS

In this short video we will see how to bleed and replace the coolant or antifreeze on a BMW F800 GS motorcycle. To bleed the cooling system we are going to remove the liquid flow pipe that we find on the lower part, unscrewing the two fixing screws; let the liquid drain into a container. At this point we are going to remove the right side fairing to access the coolant filling tank; then we fill up to reach the maximum level indicated with a notch on the tray itself, trying not to go further!


Posted on 8 February 2024 by ScegliAuto



How to replace the coolant on the Bmw F800 GS
F800gs In today's video we will see the main steps to replace the coolant or antifreeze on the Bmw F800 GS motorcycle. First we put the central stand to our
How to replace the coolant of the BMW F800 GS
F800gs Today we will see the instructions on how to drain and replace the coolant of the BMW F800 GS motorcycle. First of all, we put our bike on the centra
How to replace the battery of the Bmw F800 GS
F800gs Let's see in this short and simple guide the steps on how to disassemble and replace the battery of the Bmw F800 GS motorcycle. First we put the cent

How to change the Harley Davidson Street Glide engine oil and relative filter

The guide shows you how to change the Harley Davidson Street Glide engine oil. The first thing to do is to make the motorcycle safe and unscrew the oil tank cap. At this point, from the bottom of the bike, unscrew the drain plug of the oil pan with a 15mm wrench; allow the oil to flow into a suitable container for disposal. From the left side of the bike, start unscrewing the oil filter and place a plastic bag to collect the oil that comes out. Remove the old filter and clean the housing. Lubricate the gasket on the new filter and install a new O-ring on the drain plug and fit the elements in place. Top up the oil to the correct amount and run the engine. Check the oil level again.

Watch the video!


by ScegliAuto

More videos