Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a BMW R 1200 GS LC

Model: Bmw R 1200 Gs Lc
Part: Air filter

This video is currently unavailable

To replace the air filter on a BMW R 1200 GS LC, first remove the motorcycle seat to access the bolts securing the plastic covers on the fuel tank. Once the covers are removed, you can access the underlying components, including the air filter, which can be extracted from its housing and replaced with a new part.

After installing the new filter, reattach the fuel tank cover and then the seat.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on a BMW R 1200 GS LC
Replacing the Air Filter on a BMW R 1200 GS LC
R 1200 Gs Lc Before proceeding to replace the air filter on the BMW R 1200 GS LC, ensure the bike is stable and secure on its stand. This precaution, which should…
How to Replace the Air Filter on a BMW R 1200 GS LC
How to Replace the Air Filter on a BMW R 1200 GS LC
R 1200 Gs Lc To replace the air filter on a BMW R 1200 GS LC, you need to remove the fairing located in the central part of the fuel tank. This will be secured wi…
How to Replace the Battery on a BMW R 1200 GS LC?
R 1200 Gs Lc To replace the battery on a BMW R 1200 GS LC, you need to use a screwdriver to loosen the screws that secure the protective cover on the right side o…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos