Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the BMW R 1200 RT

Model: Bmw R 1200 Rt
Part: Service warning light

Video tutorial

In today's video, learn how to reset the service light on the BMW R 1200 RT using the OBD port. First, ensure you perform the correct maintenance as outlined in your motorcycle's manual, along with the service schedule.

Next, start the motorcycle and remove the seat by disconnecting it properly. At this point, you will find the OBD port to connect the appropriate tool.

Then, pair your smartphone and reset the service on it. As you can see, this is a simple and quick operation that can be executed immediately by anyone.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the BMW R 1200 RT?
How do you replace the exhaust pipe of the BMW R 1200 RT?
R 1200 Rt In order to replace the exhaust pipe of the BMW R 1200 RT, you need to loosen the screws that fix the exhaust terminal to its housing, which will be …
How to Replace the Exhaust on a BMW R1200 RT
How to Replace the Exhaust on a BMW R1200 RT
R 1200 Rt To replace the exhaust on a BMW R1200 RT, you will need to loosen the bolts that secure the exhaust terminal to its housing, located near the rear wh…
How to Replace the Battery on the BMW R1200 RT?
How to Replace the Battery on the BMW R1200 RT?
R 1200 Rt You can replace the battery on the BMW R1200 RT by loosening the screws that secure the cover panel located on the right side of the vehicle, just be…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos