|
Do it yourself
| |||
| ||||
Model: Bmw R 1250 Gs
To replace the rear-view mirror of the BMW R 1250 GS, lift the rubber cap located at the base of the mirror support: by lifting this cap, you will find the nut that secures it in place underneath. Once this nut is loosened, you can pull the mirror out of its housing, allowing you to insert the new replacement part into its place. The new part must be secured by tightening the nut at its base and then covering everything with the rubber cap.
Updated on 11 July 2026 by ScegliAuto
Video tutorial
Related tutorials
R 1250 Gs
Below we will see the instructions that will allow us to disassemble and replace the exhaust terminal of the BMW R 1250 GS motorcycle. First, let's p…
R 1250 Gs
To replace the battery on the BMW R 1250 GS, loosen the bolts securing the cover on the left side of the bike to remove it. Once removed, you will ha…
R 1250 Gs
To replace the battery on the BMW R 1250 GSA, loosen the bolts securing the cover on the right side of the bike so that it can be completely removed.…
|
How to Replace the Air Filter on a Honda CB500X?
Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.234
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
