Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant in the BMW F800 R

Model: Bmw F800 R
Part: Antifreeze coolant

Video tutorial

This guide provides instructions for draining and refilling the coolant or antifreeze in the BMW F800 R motorcycle, as well as the F800 GS. First, place your motorcycle on the centre stand and start by removing the right side plastic fairing, unscrewing the cap of the coolant reservoir; then unscrew the drain screw on the water pump casing, allowing the fluid to drain into a container, as shown in the video.

At this point, pour in the new antifreeze, filling it up to the maximum level mark!


Updated on 13 July 2026 by ScegliAuto


Related tutorials

F800 R In this brief and simple guide, you will learn how to remove and replace the battery on the BMW F800 R motorcycle by following the instructions below…
F800 R This guide briefly outlines the steps to remove and replace the battery on the BMW F800 R motorcycle. First, place your bike on the centre stand and …
F800 R In this short and simple guide, you will learn how to remove and replace the engine air filter on the BMW F800 R, following the instructions below. F…

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!


by ScegliAuto

More videos