Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw S 1000 Rr
Part: Headlight

In this tutorial, you will see how to replace the front headlight bulbs on a BMW S 1000 RR, a very simple and quick operation. First, ensure that the key is not inserted for safety, then unscrew the circular cap located at the back of the headlight in question and disconnect the power connector by pulling it towards you. Once done, unclip the metal clip as shown in the video, grasp the bulb and remove it from the housing. Finally, insert the replacement, reassemble everything by following the reverse procedure, and if necessary, repeat the operation for the opposite headlight.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the BMW S 1000 RR
How to Replace the Front Headlight Bulb of the BMW S 1000 RR
S 1000 Rr To replace the front headlight bulb of the BMW S 1000 RR, loosen the screws securing the internal protection panel located near the motorcycle's inst…
How to Replace the Air Filter on the BMW S 1000 RR
How to Replace the Air Filter on the BMW S 1000 RR
S 1000 Rr To replace the air filter on the BMW S 1000 RR, you need to remove the cover from the front of the tank, located just below the handlebars. Once this…
How do you replace the exhaust pipe of the BMW S 1000 RR?
How do you replace the exhaust pipe of the BMW S 1000 RR?
S 1000 Rr In order to replace the muffler of the BMW S 1000 RR, you need to loosen the screws that secure the terminal to its housing, which is located on the …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos