Do it yourself
Frequently asked questions about cars and motorcycles
Here are the instructions to remove and replace the front headlamp and its bulbs on the BMW R1150 GS motorcycle. First, place the motorcycle on a stand and start removing the plastic covers found on the front headlamp; then unscrew the fixing screws of the headlamp unit, as shown in the video. Next, unscrew the screws of the fuel tank to access the rear screws of the headlamp; disconnect the electrical connector to remove the headlamp, then replace the bulbs (ensuring they have the same fitting); finally, refit the front headlamp unit!

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

R1150 Gs In today's tutorial video, you will see how to remove and replace the front headlight bulb on a BMW R1150 GS. First, remove the bulb protection cap b…
R1150 Gs This guide will show you how to remove and replace the starter motor on a BMW R1150 GS motorcycle. First, place the bike on a stand and begin unscrew…
R1150 Gs Today, we will discover the steps to remove and replace the fuel filter on the BMW R1150 GS motorcycle. First, place the bike on a stand and start by…

How to adjust the valve clearance on the Moto Guzzi V85TT

Valve adjustment is very important to ensure the proper functioning of the engine; by following the appropriate instructions, it is indeed possible to adjust the valve clearance of the Moto Guzzi V85TT by yourself. First, put the motorcycle on the center stand and start by removing the cylinder head cover, unscrewing all the fixing screws; then use a feeler gauge to measure the valve clearance, adjusting it according to the instructions in the motorcycle's user manual, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos