Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial video, you will see how to remove and replace the front headlight bulb on a BMW R1150 GS. First, remove the bulb protection cap by accessing it through the slot under the instrument panel; then disconnect the electrical connector to access the bulb. At this point, remove the old bulb and replace it with a new one of the correct type (in this case, with H1 fitting). Finally, insert it back into the headlamp, securing it with the metal clip and reconnecting the connector: then replace the plastic cap!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp and Bulbs on the BMW R1150 GS
Replacing the Front Headlamp and Bulbs on the BMW R1150 GS
R1150 Gs Here are the instructions to remove and replace the front headlamp and its bulbs on the BMW R1150 GS motorcycle. First, place the motorcycle on a sta…
How to replace the battery in the BMW R1150 GS?
How to replace the battery in the BMW R1150 GS?
R1150 Gs As we can see in this tutorial, replacing the battery in the BMW R1150 GS is an extremely simple and quick operation. First of all, make sure that th…
How to replace the fuel filter on the BMW R1150 GS
How to replace the fuel filter on the BMW R1150 GS
R1150 Gs Today, we will discover the steps to remove and replace the fuel filter on the BMW R1150 GS motorcycle. First, place the bike on a stand and start by…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos