Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the BMW K75?

Model: Bmw K75
Part: Headlight bulb

Video tutorial

To replace the headlight bulb on the BMW K75, loosen the screws that secure the optical unit cover, located at its lower part: once these screws are loosened, you can remove the optical unit from its housing and pull out the bulb inside. Once the old bulb is removed, insert the new one into the optical unit and secure it back in its housing; once the optical unit is in place, tighten it with the screws at the bottom, ensuring everything works.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the BMW K75?
How do you replace the exhaust pipe of the BMW K75?
K75 The exhaust pipe installed on the BMW K75 can be replaced by loosening the screws that fix it to its seat, on the left side of the motorcycle near th…
How do you replace the spark plug of the BMW K75?
How do you replace the spark plug of the BMW K75?
K75 In order to replace the spark plug of the BMW K75, you need to loosen the screws that secure the panel on the left side of the engine block. Once thi…
How do you replace the muffler of the BMW K75?
How do you replace the muffler of the BMW K75?
K75 It will be possible to replace the exhaust pipe installed on the BMW K75 by loosening the screws that fix it to the corresponding seat on the left si…

How to Change the Headlight Bulb on the Aprilia Scarabeo 50

In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the instructions below. First, place the scooter on the centre stand and begin by removing the plastic cover located in front of the instrument panel; to do this, unscrew the securing screws found underneath, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with a new one (with the same fitting); then reassemble the bulb and the optical unit!

Watch the video!


by ScegliAuto

More videos