Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1250 Gs
Part: Wheel

Below we will see the steps that will allow us to disassemble and replace the front wheel and tire of the BMW R1250 GS motorcycle. First of all, we put the motorcycle on the center stand and start loosening the fork bolts; then we unscrew the bolts fixing the front brake calipers, subsequently removing the central wheel axle, as shown in the video. Once the wheel is removed, it will be possible to remove and replace the front tire; if necessary, replace the brake discs and reassemble the front wheel, following the video tutorial until the end!

Posted on 25 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a BMW R1250 GS?
How to Reset the Service Light on a BMW R1250 GS?
R1250 Gs To reset the Service light displayed on the instrument panel of the BMW R1250 GS, connect a diagnostic tool to the vehicle's OBD port: this is locate…
How to Replace the Coolant in the BMW R1250 GS
How to Replace the Coolant in the BMW R1250 GS
R1250 Gs This guide will show you how to bleed and top up the engine coolant of the BMW R1250 GS motorcycle. First, place the bike on its centre stand and sta…
How to Replace the Remote Battery of a BMW R1250 GS?
How to Replace the Remote Battery of a BMW R1250 GS?
R1250 Gs In this tutorial, you will learn how to replace the remote battery of a BMW R1250 GS, a very simple and quick operation. For this, you will need a re…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos