Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 1
  6. : Manufacturer emblem

BMW Serie 1 - Manufacturer emblem

Manufacturer Emblem BMW Serie 1 (2011-2019 / mk 2, f 20, f 21)

BMW Serie 1 (2011-2019 / MK 2, F20, F21)
Replacement of the front emblem of the BMW 1 Series manufacturer.

These short and simple steps will show us the procedure for disassembling and replacing the front manufacturer's emblem of the BMW 1 Series. First of all, …Read all…
Posted on 28 October 2024 by ScegliAuto

Cigarette lighter (2) Airbag (4) Alternator (1) Speaker (2) Antenna (1) Car stereo (7) Anti-roll bar (1) Battery (13) Transmission (2) Spark plugs (1) Convertible top (2) Body (7) Control unit (1) Key (33) Timing belt (11) V-belt (4) Air conditioner (1) Onboard computer (10) Checks and maintenance (37) Dashboard (4) Headlight (10) Tail light (9) Fog lights (4) Air filter (6) Cabin air filter (8) Diesel fuel filter (1) Oil filter (1) Parking brake (3) Grille (5) Window switch (1) Accessory kit (1) Light bulb (7) Side marker bulb (2) Headlight bulb (19) Tail light bulb (5) Interior dome light bulb (3) Antifreeze coolant (3) (1) Handle (1) Trim cover (1) Engine (1) Power window motor (1) Electric power steering motor (1) Transmission fluid (3) Engine oil (4) Power steering fluid (1) Clock (9) Door trim panel (8) Rear bumper (2) Brake pads (5) Shift knob (6) Pump (2) Car door (3) Push button (1) Instrument cluster (5) Fuse box (58) Seat (4) Engine coolant temperature sensor (1) Parking sensors (2) Side mirror (11) Warning light – error code (36) (35) Tire pressure warning light (13) Service warning light (80) Manufacturer emblem (1) Fuel cap (6) Windshield wipers (4) Center console tunnel (1) Blower motor (2) Steering wheel (9)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos