Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Manufacturer Badge on a BMW 1 Series

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Manufacturer emblem

See other generations:
Video tutorial

These brief and simple steps will show you the procedure for removing and replacing the front manufacturer badge on a BMW 1 Series. First, move to the front of the vehicle and start using thin levers to gently detach and remove the front logo, taking care not to damage the bodywork; then clean the surface of the manufacturer badge thoroughly, so that you can apply the new logo perfectly and aligned, as shown in the video.

Wait a few minutes before resuming driving.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Light on the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this new guide dedicated to all of you who own a BMW 1 Series (2004-2013), we will discover the various steps to follow if you want to manually re…
How to Open the Bonnet of a BMW 1 Series
How to Open the Bonnet of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you start, sit in the driver's seat of your BMW 1 Series. Begin by pulling the bonnet release lever located at the bottom right of the driver'…
Where is the fuse box located in the BMW 1 Series?
Where is the fuse box located in the BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this guide, discover where the fuses are located in the BMW 1 Series E87, the first generation of the Bavarian manufacturer's three-volume model. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos