Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : Accessory kit

BMW Serie 1 - Accessory kit

Accessory Kit BMW Serie 1 (2004-2013 / e 81, e 82, mk 1, e 87)

BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87)
Installing the Carbon Fibre Rear Spoiler Accessory Kit
First, remove the original spoiler that is glued to the bonnet: it is recommended to use a strong cotton thread (to cut the double-sided tape) and a microfiber …Read all…
Posted on 5 February 2026 by ScegliAuto
Cigarette lighter (2) Airbag (4) Alternator (1) Speaker (2) Antenna (1) Car stereo (7) Anti-roll bar (1) Battery (13) Transmission (2) Spark plugs (1) Convertible top (2) Body (7) Control unit (1) Key (33) Timing belt (11) V-belt (4) Air conditioner (1) Onboard computer (10) Checks and maintenance (37) Dashboard (4) Headlight (10) Tail light (9) Fog lights (4) Air filter (6) Cabin air filter (8) Diesel fuel filter (1) Oil filter (1) Parking brake (3) Grille (5) Window switch (1) Accessory kit (1) Light bulb (7) Side marker bulb (2) Headlight bulb (20) Tail light bulb (5) Interior dome light bulb (3) Antifreeze coolant (3) (1) Handle (1) Trim cover (1) Engine (1) Power window motor (1) Electric power steering motor (1) Transmission fluid (3) Engine oil (4) Power steering fluid (1) Clock (9) Door trim panel (9) Rear bumper (2) Brake pads (5) Shift knob (6) Pump (2) Car door (3) Push button (1) Instrument cluster (5) Fuse box (58) Seat (4) Engine coolant temperature sensor (1) Parking sensors (2) Side mirror (11) Warning light – error code (36) Tire pressure warning light (48) Service warning light (80) Manufacturer emblem (1) Fuel cap (6) Windshield wipers (4) Center console tunnel (1) Blower motor (2) Steering wheel (9)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos