Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on the BMW 2 Series

Model: BMW Serie 2 F45 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

Today's step-by-step instructions will show you how to remove and replace the rear brake pads on the BMW 2 Series. First, lift the vehicle and remove the rear wheel by unscrewing the bolts; then, unscrew the bolts of the rear brake caliper, removing the old brake pads as shown in the video.

At this point, press the caliper piston to retract it, cleaning the caliper of any residual dirt; install the new brake pads and finally the caliper onto the rotor, then reattach the wheel!


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Reset the Brake Pad Service Light on a BMW M2?
How to Reset the Brake Pad Service Light on a BMW M2?
BMW Serie 2 (2014-2021 / F45) In this tutorial, you will see how to reset the brake pad service light on a BMW M2, a very simple and quick operation to perform only after completi…
Where are the fuses located in the BMW 2 Series?
Where are the fuses located in the BMW 2 Series?
BMW Serie 2 (2013-2021 / F22) The fuses of the BMW 2 Series are located inside the appropriate boxes that are designed to contain them and are installed on the vehicle: in this ty…
Replacing BMW 2 Series Key Fob Battery
Replacing BMW 2 Series Key Fob Battery
BMW Serie 2 (2014-2021 / F45) Today, in this short and simple video tutorial, you will learn how to disassemble and replace the battery in the key fob of a BMW 2 Series. First, pu…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos