Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the BMW 2 Series?

Model: BMW Serie 2 F22 - Years 2013-2021
Part: Fuse box

The fuses of the BMW 2 Series are located inside the appropriate boxes that are designed to contain them and are installed on the vehicle: in this type of vehicle, two boxes can be identified. The first is located in the upper right part of the engine compartment, just below the windshield: it contains the fuses for the front lights, windshield wipers, horn, etc. The second box will be found in the lower part of the trunk: this one contains the fuses for the rear lights, rear defroster, cigarette lighter, lambda sensors, etc. Each fuse must be replaced with one of the same amperage.

Posted on 18 May 2025 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) If a device in your BMW 2 Series suddenly stops working, the first thing to do is check the status of the respective fuses, which are shown in this v…
Fuse box and positioning of fuses for the BMW 2 Series.
Fuse box and positioning of fuses for the BMW 2 Series.
BMW Serie 2 (2013-2021 / F22) Let's go discover the information that will allow us to identify the layout and positioning of the fuse boxes of the BMW 2 Series, M235i version. Fir…
How do you replace the battery of the BMW 2 Series?
How do you replace the battery of the BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) The battery installed on the BMW 2 Series can be replaced by opening the hood, so that it is possible to locate the device inside the engine compartm…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos