Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure indicator on the BMW X3 E83

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part:

In this article, we will explain the procedure for resetting the tire pressure warning light on the BMW X3 E83. It is recommended to perform this procedure only after checking the tire pressure. To reset the warning light, you will need to turn the key to position 2 to start the dashboard without starting the engine, then press and hold the tire pressure button located in the center console, in front of the gear lever, for a few seconds, hold it down until the reset is completed, that is when the light turns off. At this point, restart the dashboard to verify that the procedure has been completed correctly.

Posted on 5 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure indicator of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) The following steps will allow us to reset the tire pressure warning of the BMW X3; before resetting the TPMS sensors, it is necessary that all four …
How to reset the tire pressure warning light on the BMW X3
How to reset the tire pressure warning light on the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Today we will discover the instructions that will allow us to reset the tire pressure warning of the BMW X3; before performing the TPMS sensor reset,…
How to reset the tire pressure light on the BMW X3?
How to reset the tire pressure light on the BMW X3?
BMW X3 (2003-2010 / MK 1, E83) In this tutorial, we can see how to reset the tire pressure light in the BMW X3, an extremely simple and quick operation, to be done only once the co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos