Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear BMW Logo on the X3

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Manufacturer emblem

If the emblem representing the manufacturer's crest has become dull and unrecognizable due to sun exposure, you can replace it. This is a very simple operation since the emblem is glued to the rear hatch with double-sided adhesive. You need to carefully detach it, noting that it has two alignment pins. When prying off the emblem, do so without tilting it too much, or the pins may break. It is recommended to heat the emblem with a hairdryer to loosen the adhesive. Then, clean the surface thoroughly and attach the new emblem.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear windshield wiper of the BMW X3
Replacement of the rear windshield wiper of the BMW X3
BMW X3 (2010-2017 / MK 2, F25) Today we will discover the instructions that will allow us to disassemble and replace the rear windshield wiper or the rear wiper of the BMW X3. Firs…
How to Replace the Rear Differential Oil in a BMW X3?
How to Replace the Rear Differential Oil in a BMW X3?
BMW X3 (2003-2010 / MK 1, E83) To replace the rear differential oil in a BMW X3, access the underside of the vehicle: the differential is located at the center of the rear axle. Lo…
How to Replace the Tail Light Bulb on a BMW X3
How to Replace the Tail Light Bulb on a BMW X3
BMW X3 (2010-2017 / MK 2, F25) To replace the tail light bulb on a BMW X3, open the rear hatch to access the side of the corresponding light. Here, you will find a plastic cover th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos