Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time in a BMW X3

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Clock

In this video tutorial, the steps to set the desired time in a BMW X3 vehicle are shown. Get into the car and insert the key into the slot, turn it clockwise to turn on the instrument panel without starting the engine. On the odometer, locate the two buttons near the digital display and hold down the adjustment button until you see the hour start to flash. At this point, press the button repeatedly to adjust the hour and then repeat the same action to set the minutes. Wait a few seconds for the clock to save automatically.

Posted on 7 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time in the BMW X3?
How to adjust the time in the BMW X3?
BMW X3 (2010-2017 / MK 2, F25) In this tutorial, we can see how to adjust the time in the BMW X3, an extremely simple and quick operation, to be carried out for example after the s…
How to Change the Time on a BMW X3
How to Change the Time on a BMW X3
BMW X3 (2003-2010 / MK 1, E83) This brief video tutorial shows how to change the time on a BMW X3, produced from 2003 to 2010. First, turn on the vehicle's ignition to power up the…
How to Set the Time in a BMW X3?
How to Set the Time in a BMW X3?
BMW X3 (2003-2010 / MK 1, E83) .. In this tutorial, you will see how to set the time in a BMW X3, a very simple and quick operation to perform if you have replaced the.. …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos