Do it yourself
Frequently asked questions about cars and motorcycles

Where are the fuses located in the BMW 5 Series E60?

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Fuse box

In the BMW E60 (5 Series produced from 2003 to 2010), the fuses are located in different positions inside the vehicle. Here are the main locations: 1. **Compartment in the engine bay**: - Under the hood, on the right side of the engine bay (looking at the engine from the front of the vehicle), there is a fuse box. You will need to lift a cover to access the fuses. 2. **Compartment in the trunk**: - In the trunk, on the right side (behind the side panel), there is another group of fuses. To access it, you need to remove the side panel. 3. **Compartment under the dashboard (near the glove box)**: - Another group of fuses is located under the dashboard, in the lower part of the passenger side glove box. To access these fuses, you may need to remove the lower dashboard panel. These locations cover most of the fuses for various electronic systems in the vehicle. The fuse box in the engine bay is usually reserved for fuses for engine-related components, while the other boxes cover various accessories and internal components.

Posted on 8 March 2025 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (2003-2010 / E61, E60) Unlike many other car models, in the BMW 5 Series E60 (2003-2010), the fuse box is not located in the engine compartment or inside the cabin, but in …
BMW Serie 5 (2003-2010 / E61, E60) The fuses in the BMW 5 Series are located inside the designated fuse boxes installed in the vehicle: this car model has two fuse boxes. The first is …
BMW Serie 5 (2003-2010 / E61, E60) If you are wondering where the fuse box is located in your BMW 5 Series E60 (2003-2010), don't worry because below you will find all the necessary in…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 5 2003-2010 - Where is the license plate light fuse located on the BMW 5 Series? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos