Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure sensor of the BMW E93

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Warning light – error code

If you have just inflated the tires of your BMW e93 or have replaced one due to a puncture and the corresponding warning light continues to appear on the instrument panel, you just need to follow the following procedure to reset it manually. First of all, get into the car and turn on the ignition, then navigate through the various screens of the display until you see the icon of the tire pressure warning light. At this point, press and hold the "BC" button located on the left steering column lever and wait for the reset of the warning light to complete. Finally, release the button and turn off the ignition.

Posted on 8 March 2025 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) To reset the tire pressure warning light of the BMW 3 Series, you need to inflate the tires until they reach the recommended pressure value: this val…
BMW Serie 3 (1998-2006 / E46) To reset the tire pressure light on a BMW 3 Series, first inflate all tires to the correct pressure. Once all tires are inflated, enter the cabin. Tu…
BMW Serie 3 (2012-2019 / F30, F31) Today we are shown how to reset the tire pressure on a BMW 3 Series, F30 model produced from 2012 to 2019. Before performing this operation, it is im…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos