Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Z3
    4. : How to replace light bulbs on BMW Z3

BMW Z3 - Video tutorial

Model: BMW Z3 MK 1 - Years 1995-2002
Part: Rear light bulb
Operation: How to replace light bulbs on BMW Z3

The rear lights of your BMW Z 3 Series no longer work? Let's see in this video how to replace the bulbs: we open the boot of the luggage compartment, we remove the plastic panel on the side of the covering (we unscrew the plastic locking pin). Once the plastic cover has been unscrewed, let's go and extract the bulb holders. Let's get ready to replace the damaged bulbs with new ones (size and voltage equal). Finally we go to reassemble the bulb holder with annexes and reassemble the plastic cap with the pin. We test the correct functioning of the previously mounted bulbs.


Posted on 20 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos