Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the door panel of the BMW IX

Model: BMW iX MK 1 - Years 2021-2026
Part: Door trim panel

Today's information will allow us to disassemble and remove the front door panel of the BMW IX. First, we open the front door and start unscrewing the side screws, removing the plastic caps first; then we remove the lower plastic cover and lever on the sides of the panel to detach and remove it, as shown in the video. At this point, we disconnect the electrical connector and the handle cable found at the back, thus gaining access to the internal parts of the door; once the necessary operations have been carried out, we will proceed to reassemble the door panel!

Posted on 11 May 2025 by ScegliAuto

Video tutorial

Related tutorials

BMW iX (2021-2026 / MK 1) Let's see how to disable the motion sensors on a BMW IX: using the standard method, temporarily disable the sensors so you can leave a pet inside, fo…
BMW iX (2021-2026 / MK 1) In this video tutorial, you will see how to replace the remote battery on a BMW Ix. The first thing to do is buy a new CR 2032 3V battery. The remote…

How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson

Today, we will discover the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Hyundai Tucson; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the ignition; next, navigate to the onboard computer settings using the controls on the steering wheel until you reach the tyre pressure monitoring section, as shown in the video. At this point, confirm and execute the reset of the TPMS warning light!

Watch the video!


by ScegliAuto

More videos