Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Exterior Door Handle on the BMW X6

Model: BMW X6 MK 3, G06 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Handle

See other generations:
Video tutorial

These brief and simple steps will show you how to remove and replace the exterior door handle on the rear door of the BMW X6. First, open the rear door of the vehicle and start unscrewing the fastening screw located on the side of the door; then, detach the door handle from the outside until you completely remove it, as shown in the video.

At this point, perform the repair or replacement by properly installing and securing the exterior door handle; similarly, replace the other handles if necessary.


Posted on 26 July 2026 by ScegliAuto


Related tutorials

BMW X6 (2007-2014 / MK 1, E71) After obtaining a plastic wedge, remove the plastic covering the lock button from the door, as shown in the video. Similarly, remove the switch panel…
BMW X6 (2007-2014 / MK 1, E71) Open the door and remove the panel. To do this, get a plastic wedge or a small flathead screwdriver and detach the plastic near the door handle. Then…
BMW X6 (2014-2019 / MK 2, F16) To replace the outside mirror on a BMW X6, remove the trim piece located on the door handle corresponding to the mirror. Once the trim is off, you ca…

How to open the bonnet of a Peugeot 308

To open the bonnet of a Peugeot 308, first enter the vehicle and pull the lever located on the left side of the driver's footwell, next to the door. You should hear a slight "click" indicating the bonnet has released. Then, move to the front of the vehicle. On the left side of the front edge, near the letter "p" in the Peugeot logo, you will find a ring that you need to pull towards you. This will open the bonnet, allowing you to lift it up and secure it with the safety prop.

Watch the video!


by ScegliAuto

More videos