Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on BMW X6

Model: BMW X6 MK 1, E71 - Years 2007-2014
Part: Door trim panel

After obtaining a plastic wedge, remove the plastic covering the lock button from the door, as shown in the video. Similarly, remove the switch panel next to the handle, the cover behind the window switch buttons, and the small side plastic piece. At this point, you will notice screws underneath all these plastics you have removed that secure the panel to the door. Two more bolts are located under the panel itself. Once all are removed, you can take off the panel by pulling it gently and disconnecting the connectors during extraction.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Exterior Door Handle on the BMW X6
Replacing the Exterior Door Handle on the BMW X6
BMW X6 (2019-2026 / MK 3, G06) These brief and simple steps will show you how to remove and replace the exterior door handle on the rear door of the BMW X6. First, open the rear do…
How to Replace the Outside Mirror on a BMW X6
How to Replace the Outside Mirror on a BMW X6
BMW X6 (2014-2019 / MK 2, F16) To replace the outside mirror on a BMW X6, remove the trim piece located on the door handle corresponding to the mirror. Once the trim is off, you ca…
Where to Find the Fuse Box in the BMW X6
BMW X6 (2019-2026 / MK 3, G06) In this guide dedicated to your BMW X6 third generation (2019-2022), we will discover where the box containing all the various fuses of the car is lo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos