Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Replacement gear knob on BMW cars

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 G30 - Years 2017-2024
Part: Gear Shift Knob
Operation: Replacement gear knob on BMW cars

Using a small plastic lever, remove the upper plastic of the knob, the one with the drawings of the gears. At this point, unscrew the two small screws that you have discovered. Again with the same plastic wedge now remove the main part of the knob and unscrew the other screws that were under it. Once all the screws have been removed, you can finally detach the knob by pulling it and at the same time rotating it a little both in one direction and another, in order to facilitate its exit from its seat. Obviously, to assemble the new knob you have purchased, proceed backwards. Good work!


Posted on 5 January 2024 by ScegliAuto



How to replace the gear lever knob on a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Before we can begin, we will have to go and sit in the driver's seat of our BMW 5 Series E60. So let's start by going to insert neutral (N), simply b
Replacement of the knob on BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Before seeing the replacement of the knob, please note that it is good practice to disconnect the battery for safety reasons. Once this is done, let'
Gear lever replacement
BMW Serie 5 (1995-2003 / E39) Obtain the new gear lever suitable for the vehicle in question. Subsequently, as a first step, unhook the gear lever cover by pulling it upwards, but

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos