Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Crankshaft Pulley on a BMW X3?

Model: BMW X3 E83, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the crankshaft pulley on a BMW X3, first open the hood and remove the cover from the front of the engine. At this point, the crankshaft pulley will be visible, located directly beneath the viscous fan. To remove it, loosen the central bolt using a pneumatic gun or a socket wrench.

Once the old crankshaft pulley is removed, install the new replacement part: the pulley must be secured using the proper torque specification. After completing the operation, reinstall the cover on the front of the engine.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

BMW X3 (2003-2010 / E83, MK 1) Unlatch and lift the hood, then you will need to remove all the parts above the area where you will be working. As shown in the video, you can remove…
BMW X3 (2017-2024 / MK 3, G01) Before you start, open the hood of your BMW X3. First, unscrew and remove the rear cover of the burnt-out bulb. Next, disengage the burnt-out bulb an…
BMW X3 (2017-2024 / MK 3, G01) If you own a BMW X3 and want to know the steps to complete the replacement of the cabin air filter, just follow these instructions and put them into …

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos