Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore Plastic Trim on Your Car's Body

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Body

A well-maintained body significantly enhances the appearance of your car. This guide shows how to restore the look of your vehicle's plastic trim using a gel designed for automotive bodies, readily available at any auto body supply store. The gel adheres to the surfaces without dripping, perfectly reaching the corners of the car's doors. Once you apply the gel to the car's surface, use a sponge or cloth to spread it evenly over the area of interest.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Preparation of Sport Suspension Shocks
Preparation of Sport Suspension Shocks
BMW Serie 3 (1998-2006 / E46) If you plan to install a new shock absorber kit with adjustable sport suspension, you will need to properly set up the shocks before installation. Ad…
How do you adjust the coilover suspension of the BMW 3 Series?
How do you adjust the coilover suspension of the BMW 3 Series?
BMW Serie 3 (1990-2001 / E36) To be able to adjust the coilover suspension of the BMW 3 Series, you must first loosen the bolts that secure the wheels and remove them completely, …
Detailed Cleaning of Your Vehicle
Detailed Cleaning of Your Vehicle
BMW Serie 3 (2005-2013 / E91, E90, E92) The following guide goes well beyond simply washing your car. It means paying attention to the small details to make your car's appearance stand out.…

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos