Do it yourself
Frequently asked questions about cars and motorcycles

Preparation of Sport Suspension Shocks

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Suspension system

See other generations:
Video tutorial

If you plan to install a new shock absorber kit with adjustable sport suspension, you will need to properly set up the shocks before installation. Adjust the height of the link mounting bracket and the stiffness of the shock absorber using the appropriate collar.

Finally, adjust the support plate to be applied to the body strut. When adjusting the suspension stiffness, aim for a good balance between stability and comfort, especially if you use the car for daily driving, taking into account the condition of the roads you typically drive.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (1998-2006 / E46) The failure and resulting noise of the front shock absorber mounts is a common issue in many BMW models. Replacing them requires disassembling the sh…
BMW Serie 3 (1998-2006 / E46) You only need an 18mm socket wrench for this operation. Remove the wheel and unscrew the nut that holds one end of the shock absorber to the vehicle …
BMW Serie 3 (2005-2013 / E92, E90, E91) When a car is new, the shock absorber setting is very soft, typically ranging from 1 to 4. However, you can adjust it to customize the stiffness. To …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos