Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Worn Shock Absorbers

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Shocks

You only need an 18mm socket wrench for this operation. Remove the wheel and unscrew the nut that holds one end of the shock absorber to the vehicle frame. First, securely tie the entire suspension arm assembly to prevent it from falling during the operation. Safely position the vehicle on jack stands and remove the retaining pins from the suspension arm cover. Unscrew the bolt that holds the shock absorber to the arm using an 18mm ratchet wrench and remove the worn suspension. Attach the new shock absorber to the base and then to the frame. Perform a road test to verify proper operation.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Preparation of Sport Suspension Shocks
Preparation of Sport Suspension Shocks
BMW Serie 3 (1998-2006 / E46) If you plan to install a new shock absorber kit with adjustable sport suspension, you will need to properly set up the shocks before installation. Ad…
Replacing Shock Absorber Mounts
Replacing Shock Absorber Mounts
BMW Serie 3 (1998-2006 / E46) The failure and resulting noise of the front shock absorber mounts is a common issue in many BMW models. Replacing them requires disassembling the sh…
Front Shock Absorber Replacement Instructions
Front Shock Absorber Replacement Instructions
BMW Serie 3 (1998-2006 / E46) To replace the shock absorbers, first obtain the appropriate clamps to compress the spring attached to the shock. Remove the old shock absorber from …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos