Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Windshield Wiper Arm Operation

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Windshield wipers

To access the mounting points of the windshield wiper arms, first open the hood for better maneuverability. The wipers are operated through a linkage that allows the wiper arm to follow a trajectory that ensures complete cleaning of the windshield with relatively small wipers. If you need to remove them, take off the caps protecting the nuts securing the arms: use a small screwdriver or a pick to pry them off. Once the caps are removed, simply unscrew the nuts and pull off the arms. When reassembling, pay attention to the positioning on the splines of the drive shaft.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front windshield wipers of the BMW 5 Series.
Replacement of the front windshield wipers of the BMW 5 Series.
BMW Serie 5 (1995-2003 / E39) The following steps will show us the process of disassembly and replacement of the front windshield wipers, but it also applies to the rear wiper, of…
Windshield Wiper Blade Removal Instructions
Windshield Wiper Blade Removal Instructions
BMW Serie 5 (1995-2003 / E39) The wiper blade of the car model shown in the video is attached to the corresponding arm via a special clip: to remove the blade, it is not necessary…
How to Remove and Install Wiper Blades on the Front Windshield Wipers of a BMW 5 Series
How to Remove and Install Wiper Blades on the Front Windshield Wipers of a BMW 5 Series
BMW Serie 5 (1995-2003 / E39) In this video, see how to remove and install the wiper blades on the front windshield wipers of a BMW 5 Series. Grip the front wiper blade with your …

How to Remove the Rear Bumper on the Ford Fiesta

The preliminary operation is to detach the rear wheel arch from the bumper to access the screws underneath that secure the bumper (the wheel arch detaches by extracting the two plastic screws with a lever). Now unscrew all the screws around the perimeter of the bumper (you can see them by opening the rear hatch) and now you can detach the plastic from the bodywork by gently pulling it outwards: during this operation, be careful not to break the locking pins. Once you have extracted and replaced the bumper, you can reposition it and secure it by following the same operations done previously.

Watch the video!


by ScegliAuto

More videos