Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install Wiper Blades on the Front Windshield Wipers of a BMW 5 Series

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Windshield wipers

In this video, see how to remove and install the wiper blades on the front windshield wipers of a BMW 5 Series. Grip the front wiper blade with your hands, gently pull the movable blade as shown in the video (without breaking it), and slide it off the arm attached to the wiper. Install the new blade onto the arm (if the blade is not original, you may need to install an adapter if available), and you will hear a click indicating it is secured. Finally, lower the wiper arm onto the windshield and perform the same operation on the second blade. Lastly, test the new blades installed. It is always preferable to install original parts for superior durability and quality.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Wiper Blades on a BMW 5 Series F10
How to Change the Wiper Blades on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) This brief and simple guide shows how to remove and replace the front wiper blades on a BMW 5 Series F10. First, obtain the correct new wiper blades …
Replacement of the front windshield wipers of the BMW 5 Series.
Replacement of the front windshield wipers of the BMW 5 Series.
BMW Serie 5 (1995-2003 / E39) The following steps will show us the process of disassembly and replacement of the front windshield wipers, but it also applies to the rear wiper, of…
Where is the windshield wiper relay located on the BMW 5 Series?
Where is the windshield wiper relay located on the BMW 5 Series?
BMW Serie 5 (2003-2010 / E61, E60) The windshield wiper relay for the BMW 5 Series is located inside the designated box in the engine compartment: to access the box, open the hood and …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos