Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling Windshield Wiper Motor

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Windshield wipers

See other generations:
Video tutorial

The wiper motor mechanism is located just below the windshield: to disassemble it, you need to remove the wiper arms and the plastic cover that conceals the device; this cover is secured with pressure clips and is very easy to remove; once you reach the complete motor mechanism, unscrew the mounting screws, disconnect the power connector, and pull it out from its housing by also removing the crossmember located just above the brake booster to gain more maneuvering space and facilitate the operation.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Wipers on the BMW 5 Series
Replacing the Front Wipers on the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) The following steps will show you how to remove and replace the front wipers, as well as the rear wiper, on the BMW 5 Series. First, move to the fron…
Where is the windshield wiper relay located on the BMW 5 Series?
Where is the windshield wiper relay located on the BMW 5 Series?
BMW Serie 5 (2003-2010 / E60, E61) The windshield wiper relay for the BMW 5 Series is located inside the designated box in the engine compartment: to access the box, open the hood and …
Replacing Wiper Blade Rubber
Replacing Wiper Blade Rubber
BMW Serie 5 (1995-2003 / E39) This video shows us how to replace the rubber on the wiper blade. Once you determine that your wipers need to be replaced because they cannot clean t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos