Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blade Rubber

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Windshield wipers

This video shows us how to replace the rubber on the wiper blade. Once you determine that your wipers need to be replaced because they cannot clean the glass, you can either replace them entirely or, as in this case, remove them and replace only the rubber that contacts the windshield. After removing the wipers, proceed to remove the rubber strip by sliding it out of its housing track. Once the rubber is extracted, insert the new rubber by sliding it into the wiper blade track.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Wiper Blade Rubber
Replacing Wiper Blade Rubber
BMW Serie 5 (1995-2003 / E39) An economical yet effective solution is to replace only the rubber of the wiper blades. If the support arm is intact and only the rubber has deterior…
Windshield Wiper Blade Rubber Replacement
Windshield Wiper Blade Rubber Replacement
BMW Serie 5 (1995-2003 / E39) You can purchase aftermarket wiper blade rubber refills instead of the entire blade and refurbish the original ones. Disconnect the locking mechanism…
Replacement of the front windshield wipers of the BMW 5 Series.
Replacement of the front windshield wipers of the BMW 5 Series.
BMW Serie 5 (1995-2003 / E39) The following steps will show us the process of disassembly and replacement of the front windshield wipers, but it also applies to the rear wiper, of…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos