Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Windscreen wiper motor disassembly instructions

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Windscreen wipers
Operation: Windscreen wiper motor disassembly instructions

In order to access the seat of the wiper drive motor, it is necessary to remove the trim strip which is located immediately under the windscreen and which is fixed by means of a series of star screws, in order to remove this strip however, it is first of all it is necessary to remove the control arms of the wiper blades: then remove the plastic cover present at the base of the arms, unscrew the fixing nuts without removing them completely and use a spider extractor to extract the arm eyelet from the control pinion (you can it may also be useful to spray the unlocking spray).


Posted on 14 August 2023 by ScegliAuto



Disassembly of the wiper blade motor
BMW Serie 5 (1995-2003 / E39) The mechanism for activating the wiper blades is located immediately under the windscreen: to be able to disassemble it, it is therefore necessary to
Windscreen wiper disassembly instructions
BMW Serie 5 (1995-2003 / E39) The wiper blade of the car model shown in the video is fixed to the relative control arm by means of a special safety device: in order to remove the
Windscreen wiper operating instructions
BMW Serie 5 (1995-2003 / E39) In order to access the fixing points of the control arms of the wiper blades, it is first necessary to open the front hood to have more room for mane

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos