Do it yourself
Frequently asked questions about cars and motorcycles

Necessary Precautions for Replacing the Water Pump

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Pump

See other generations:
Video tutorial

When changing the water pump, pay close attention to every detail as a malfunction of this component could cause problematic and costly breakages, potentially compromising the entire engine of the vehicle. After removing the damaged pump, located in its housing in the engine block, thoroughly clean the contact surfaces: scale from the fluid present deposits in the junction areas, and any residue on the contact surfaces would prevent proper tightening during reassembly.

Before placing the gasket and reinstalling the new pump, clean the housing carefully.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2003-2010 / E60, E61) To replace the windshield washer pump on this model of vehicle, we have gathered all the useful information and necessary steps for the replacement. …
BMW Serie 5 (1995-2003 / E39) To begin the water pump removal process, first position a container under the radiator to catch any fluid, as shown in the video. Next, remove the ai…
BMW Serie 5 (2003-2010 / E60, E61) Unscrew the three 8 mm bolts and the single 10 mm bolt located in the left front wheel well. This will be enough to move the wheel well just enough t…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos