Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Water Pump

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Pump

See other generations:
Video tutorial

To begin the water pump removal process, first position a container under the radiator to catch any fluid, as shown in the video. Next, remove the air reservoir and hose, then take off the timing belt.

To remove the water pump, unscrew the bolts that hold it in place. After that, clean the area where the pump was located.

To install the new pump, reconnect the joint that was removed earlier and tighten the bolts securely. Reinstall the hoses as they were before disassembly and also reattach the timing belt.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2003-2010 / E60, E61) To replace the windshield washer pump on this model of vehicle, we have gathered all the useful information and necessary steps for the replacement. …
BMW Serie 5 (2003-2010 / E60, E61) Unscrew the three 8 mm bolts and the single 10 mm bolt located in the left front wheel well. This will be enough to move the wheel well just enough t…
BMW Serie 5 (1995-2003 / E39) When changing the water pump, pay close attention to every detail as a malfunction of this component could cause problematic and costly breakages, po…

Other guides you may be interested in

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos