Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Pump on a Series 5

Model: BMW Serie 5 E61, E60 - Years 2003-2010

To replace the windshield washer pump on this model of vehicle, we have gathered all the useful information and necessary steps for the replacement. The first thing to do is remove the left front wheel, then proceed to remove the screws securing the front inner fender. Underneath, you will find the washer fluid reservoir and the pump. Next, disconnect the water hose and the electrical connector to remove the pump itself. Then, take the new pump and position it to reconnect the power connectors and the water hose.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Washer Pump on a BMW 5 Series?
How to Replace the Windshield Washer Pump on a BMW 5 Series?
BMW Serie 5 (1995-2003 / E39) In this tutorial, you will see how to replace the windshield washer pump on a BMW 5 Series, a very simple and quick operation. First, ensure that the…
Replace the Windshield Wiper Pump on BMW 5 Series
Replace the Windshield Wiper Pump on BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Unscrew the three 8 mm bolts and the single 10 mm bolt located in the left front wheel well. This will be enough to move the wheel well just enough t…
Replacing Windshield Washer Reservoir Grommets
Replacing Windshield Washer Reservoir Grommets
BMW Serie 5 (1995-2003 / E39) If you notice fluid leaks near the rear of the front right wheel (passenger side), it is likely that there is a leak from the windshield washer reser…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos