Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Front Structure Components

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Radiator

Once the front bumper is removed, it is very simple to continue disassembling the other components that make up the front structure; start by removing the auxiliary fan and its support frame by disconnecting the power connector; continue with the impact absorbers that are attached to the frame through a bolted flange; finally, disassemble the front grille complete with the hood latch crossmember by first unscrewing the plastic mounting brackets of the radiator and then the pins that secure it to the fenders (it may be necessary to detach some cable ties).

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Door Lock Disassembly Instructions
Door Lock Disassembly Instructions
BMW Serie 5 (1995-2003 / E39) Disassembling the door lock is not particularly complex but requires a lot of patience since you need to remove several components before completing …
Removing the Ashtray from the Door Panel
Removing the Ashtray from the Door Panel
BMW Serie 5 (1995-2003 / E39) Once the door panel is removed, it is fairly simple to complete the disassembly of its components. The glove compartment, which contains the ashtray,…
EGR Valve Thermostat Replacement
EGR Valve Thermostat Replacement
BMW Serie 5 (2003-2010 / E61, E60) Open the hood and locate the EGR valve near the front grille. The thermostat is on an aluminum hose that needs to be removed. Remove the two hose cla…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos