Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper on BMW 5 Series

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Front bumper

See other generations:
Video tutorial

To remove the front bumper, follow these steps: 1) Disconnect the clips located in the fog light grills. 2) Using a tool, gently remove the fog light grills. 3) Remove the screws in the front wheel wells. 4) Carefully disconnect the wheel well from the bumper using a tool. 5) Unscrew the bumper mounting bolts located in the "fog light grill" area. 6) With a slight lever, remove the bumper while ensuring to disconnect any electrical connections. 7) Check for any damage to the air ducts, wheel wells, and components near the area.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper Cover on BMW 5 Series
Removing the Rear Bumper Cover on BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) In this video tutorial, you will see the main steps to remove the rear bumper cover of a BMW 5 Series E60. First, open the trunk and remove the vario…
How to Change the Alternator Belt on a BMW 5 Series
How to Change the Alternator Belt on a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) This guide outlines the steps to remove and replace the alternator belt on a BMW 5 Series, following the instructions below. First, open the hood of …
Disassembly and Replacement of the Front Headlight on the BMW 5 Series
Disassembly and Replacement of the Front Headlight on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) These brief and simple steps will show you how to disassemble and replace the front headlight on the BMW 5 Series. First, open the hood of the vehicl…

How to reset the tyre pressure warning light on the Dacia Sandero?

The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light.

Watch the video!


by ScegliAuto

More videos