Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Replacement of the Front Headlight on the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Headlight

These brief and simple steps will show you how to disassemble and replace the front headlight on the BMW 5 Series. First, open the hood of the vehicle and start removing all the mounting screws located at the top of the bumper; remove the additional screws found under the bumper and on both sides of the front wheel wells, detaching and completely removing it as shown in the video. At this point, unscrew the screws of the headlight assembly, disconnecting the electrical connector for the lights to remove it; replace it with the new one, checking its proper operation!

Posted on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, we will see the instructions on how to remove and replace the low beam bulb of the headlight on the BMW 5 Series. First, open the hood of your…
Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see step-by-step instructions to remove and replace the xenon headlight bulb on the BMW 5 Series. To access the headlight bulb, raise…
How to Remove Condensation from the Front Headlight of BMW 5 Series
How to Remove Condensation from the Front Headlight of BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see the instructions that will allow you to disassemble the front headlight and remove any condensation from the BMW 5 Series. First,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos