Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Headlight bulb

Today, we will see the instructions on how to remove and replace the low beam bulb of the headlight on the BMW 5 Series. First, open the hood of your car and start removing the upper plastic cover; then move to the front wheel well to also remove the bulb cover, as shown in the video. At this point, disconnect the electrical connector of the xenon bulb, removing it along with the ballast; then install the new xenon bulb with the same fitting, applying the reverse procedure!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
Replacing the Headlight Bulb on the BMW 5 Series
Replacing the Headlight Bulb on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today, you will see step-by-step instructions to remove and replace the xenon headlight bulb on the BMW 5 Series. To access the headlight bulb, raise…
Replacing Front Headlight Position Bulb on BMW 5 Series
Replacing Front Headlight Position Bulb on BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, you will learn how to remove and replace the position bulb on a third-generation BMW 5 Series. First, open the hood and remov…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos