Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper of the BMW 5 Series

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Front bumper

See other generations:
Video tutorial

Today's step-by-step instructions will allow us to disassemble and replace the front bumper of the BMW 5 Series. First, we open the hood of the car and start removing all the screws and plastic clips we find above the bumper and on both sides of the front wheel arches; then we gently detach the bumper on the sides until it is completely removed, as shown in the video.

At this point, it will be possible to access the front components of the engine; if necessary, replace the front bumper, applying the reverse process for reassembly!


Posted on 10 January 2025 by ScegliAuto


Related tutorials

Disassembly and Replacement of the Front Headlight on the BMW 5 Series
Disassembly and Replacement of the Front Headlight on the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) These brief and simple steps will show you how to disassemble and replace the front headlight on the BMW 5 Series. First, open the hood of the vehicl…
Replacing the Headlight Lens on a BMW 5 Series
Replacing the Headlight Lens on a BMW 5 Series
BMW Serie 5 (2017-2024 / G30) Today, in this video tutorial, see how to remove and replace the headlight lens on a BMW 5 Series, following the instructions below. First, open the …
How to Change the Alternator Belt on a BMW 5 Series
How to Change the Alternator Belt on a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) This guide outlines the steps to remove and replace the alternator belt on a BMW 5 Series, following the instructions below. First, open the hood of …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos